Sandisk Extreme Pro microSDXC UHS-I 64 GB U3 V30 A2 SDSQXCU-064G-GN6MA 3031XF6513VN purchased 2023-04-24
Pi 5 rpi-updated today. dmesg does not show mmc0: Command Queue anything.
/boot/firmware/config.txt:
Pi 5 rpi-updated today. dmesg does not show mmc0: Command Queue anything.
/boot/firmware/config.txt:
Pi 5 rpdiags after rpi-update: (About the same as before)dtparam=sd_cqe
Raspberry Pi Diagnostics - version 0.14
Thu May 30 13:06:36 2024
Test : SD Card Speed Test
Run 1
prepare-file;0;0;62594;122
seq-write;0;0;60737;118
rand-4k-write;0;0;4691;1172
rand-4k-read;12898;3224;0;0
Sequential write speed 60737 KB/sec (target 10000) - PASS
Random write speed 1172 IOPS (target 500) - PASS
Random read speed 3224 IOPS (target 1500) - PASS
Test PASS
find /sys/bus/mmc/devices/mmc0\:*/ -type f -not -path "*block*" -print -exec cat {} \;
/sys/bus/mmc/devices/mmc0:aaaa/fwrev
0x6
/sys/bus/mmc/devices/mmc0:aaaa/uevent
DRIVER=mmcblk
MMC_TYPE=SD
MMC_NAME=SR64G
MODALIAS=mmc:block
/sys/bus/mmc/devices/mmc0:aaaa/cid
0353445352363447865d0c8c69017100
/sys/bus/mmc/devices/mmc0:aaaa/rca
0xaaaa
/sys/bus/mmc/devices/mmc0:aaaa/ext_power
07
/sys/bus/mmc/devices/mmc0:aaaa/csd
400e0032db790001dbd37f800a404000
/sys/bus/mmc/devices/mmc0:aaaa/manfid
0x000003
/sys/bus/mmc/devices/mmc0:aaaa/power/runtime_active_time
55174
/sys/bus/mmc/devices/mmc0:aaaa/power/runtime_status
active
/sys/bus/mmc/devices/mmc0:aaaa/power/autosuspend_delay_ms
3000
/sys/bus/mmc/devices/mmc0:aaaa/power/runtime_suspended_time
0
/sys/bus/mmc/devices/mmc0:aaaa/power/control
auto
/sys/bus/mmc/devices/mmc0:aaaa/ocr
0x00300000
/sys/bus/mmc/devices/mmc0:aaaa/preferred_erase_size
4194304
/sys/bus/mmc/devices/mmc0:aaaa/ext_perf
18
/sys/bus/mmc/devices/mmc0:aaaa/type
SD
/sys/bus/mmc/devices/mmc0:aaaa/hwrev
0x8
/sys/bus/mmc/devices/mmc0:aaaa/date
01/2023
/sys/bus/mmc/devices/mmc0:aaaa/dsr
0x404
/sys/bus/mmc/devices/mmc0:aaaa/erase_size
512
/sys/bus/mmc/devices/mmc0:aaaa/removable
removable
/sys/bus/mmc/devices/mmc0:aaaa/oemid
0x5344
/sys/bus/mmc/devices/mmc0:aaaa/serial
0x5d0c8c69
/sys/bus/mmc/devices/mmc0:aaaa/ssr
0000000008000000040090000f05391e000800000002fc0003000000000000000000000000000000000000000000000000000000000000000000000000000000
/sys/bus/mmc/devices/mmc0:aaaa/scr
0245848700000000
/sys/bus/mmc/devices/mmc0:aaaa/name
SR64G
I also have Sandisk Extreme Pro microSDXC UHS-I 64 GB U3 V30 A2 SDSQXCY-064G-GN6MA 15130FGJ220A from 2022-06-10 and have not tested it as it is older.peter@raspberrypi:~ $ sudo rpi-update
*** Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS and Dom
*** Performing self-update
*** Relaunching after update
*** Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS and Dom
FW_REV:84dae77145a7ea589cbb1faa0f15c82973c8cb69
BOOTLOADER_REV:61fb89536fc94a57c1e0afd42617849b6d0cac37
*** We're running for the first time
*** Backing up files (this will take a few minutes)
*** Backing up firmware
*** Backing up modules 6.6.28+rpt-rpi-2712
WANT_32BIT:0 WANT_64BIT:1 WANT_PI4:1 WANT_PI5:1
##############################################################
WARNING: This update bumps to rpi-6.6.y linux tree
See: viewtopic.php?p=2191175
'rpi-update' should only be used if there is a specific
reason to do so - for example, a request by a Raspberry Pi
engineer or if you want to help the testing effort
and are comfortable with restoring if there are regressions.
DO NOT use 'rpi-update' as part of a regular update process.
##############################################################
Would you like to proceed? (y/N)
Downloading bootloader tools
Downloading bootloader images
*** Downloading specific firmware revision (this will take a few minutes)
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 142M 100 142M 0 0 2865k 0 0:00:51 0:00:51 --:--:-- 2312k
*** PREPARING EEPROM UPDATES ***
BOOTLOADER: update available
CURRENT: Sat 20 Apr 2024 10:53:30 UTC (1713610410)
LATEST: Fri 17 May 2024 11:29:43 UTC (1715945383)
RELEASE: latest (/lib/firmware/raspberrypi/bootloader-2712/latest)
Use raspi-config to change the release.
CURRENT: Sat 20 Apr 2024 10:53:30 UTC (1713610410)
UPDATE: Fri 17 May 2024 11:29:43 UTC (1715945383)
BOOTFS: /boot/firmware
'/tmp/tmp.dipmD6G2JS' -> '/boot/firmware/pieeprom.upd'
UPDATING bootloader. This could take up to a minute. Please wait
*** Do not disconnect the power until the update is complete ***
If a problem occurs then the Raspberry Pi Imager may be used to create
a bootloader rescue SD card image which restores the default bootloader image.
flashrom -p linux_spi:dev=/dev/spidev10.0,spispeed=16000 -w /boot/firmware/pieeprom.upd
UPDATE SUCCESSFUL
*** Updating firmware
*** Updating kernel modules
*** depmod 6.6.31-v8-16k+
*** depmod 6.6.31-v8+
*** Updating VideoCore libraries
*** Running ldconfig
*** Storing current firmware revision
*** Deleting downloaded files
*** Syncing changes to disk
*** If no errors appeared, your firmware was successfully updated to 84dae77145a7ea589cbb1faa0f15c82973c8cb69
*** A reboot is needed to activate the new firmware
peter@raspberrypi:~ $
Statistics: Posted by peterlite — Thu May 30, 2024 3:46 am