Quantcast
Channel: Raspberry Pi Forums
Viewing all articles
Browse latest Browse all 4972

Troubleshooting • Re: HDMI issues with new Pi5 8gb

$
0
0
You have this in your cmdline.txt

Code:

dtoverlay=vc4-kms-v3d,audio
dtoverlay commands go in config.txt.

But the main problem is you have a faulty edid in your dislay:

Code:

[    3.910484] EDID block 0 (tag 0x00) checksum is invalid, remainder is 15[    3.910496] [00] BAD  00 ff ff ff ff ff ff 00 42 93 48 0a 42 17 00 00[    3.910499] [00] BAD  10 10 01 03 81 3c 22 00 ea 0b 90 a7 55 46 98 24[    3.910501] [00] BAD  00 49 4b ad cf 00 01 01 01 01 01 01 01 01 01 01[    3.910503] [00] BAD  01 01 01 01 01 01 01 1d 00 72 51 d0 1e 20 6e 28[    3.910505] [00] BAD  55 00 10 09 00 00 00 1e 00 00 00 fd 00 38 4b 1f[    3.910507] [00] BAD  50 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 46[    3.910509] [00] BAD  4c 4d 2d 32 36 33 32 0a 20 20 20 20 00 00 00 ff[    3.910510] [00] BAD  00 30 31 38 31 39 30 30 30 30 35 39 35 34 01 ff

Statistics: Posted by dom — Mon Feb 26, 2024 6:44 pm



Viewing all articles
Browse latest Browse all 4972

Trending Articles