Troubleshooting • Re: [SOLVED] dmesg : "raspberrypi-firmware soc:firmware: Request 0x00030002 returned status 0x00000000"

I'm testing without the USB 3.2 hub and only with the USB keyboard and mouse to the USB2.0 ports and the Ethernet cable; the "vcgencmd get_throttled" command is always at 0x0 value. But after a while the SBC/SoC has reached a good 58°C temp using a chromium based browser with a YouTube page running and I've already found the error above. The vclog command just show something that seems usual:

004871.182: Initial voltage 800000 temp 15847
005068.612: avs_2712: AVS pred 9319 931900 temp 16397
005068.623: vpred 931 mV +0
005694.846: FB framebuffer_swap 1
005723.775: Select resolution HDMI0/2 hotplug 1 max_mode 2
005736.165: HDMI0 edid block 0 offset 0
...

and no hang/crash line. The error in the dmesg report:

[ 1721.673922] raspberrypi-firmware soc:firmware: Request 0x00030002 returned status 0x00000000.

The chromium based browser is just reporting this in the GPU page I suppose for the OpenGL ES 3 check:

ERROR:context_group.cc(182)] : ContextResult::kFatalFailure: ES3 is blocklisted/disabled/unsupported by driver.

Statistics: Posted by f982 — Wed Feb 21, 2024 5:26 pm

---